Pay Attention to Installation and Commissioning of Sand Washer

Descripción

Hongxing’s Sand washer is the best choice in terms of upgrading washing sand industry. The sand washer in the whole process of making sand, makes the sand making skills further ascension. In futural development, the quality of manufactured sand will be increasingly improved, and sand washing machine will have a more broad space for development. The commissioning operation is very necessary for the sand washer. As a result, we must know the basic operation requirements for the commissioning of the sand washer. The operation requirements for the sand washer are the followings.

First, before starting the machine, you must check whether the various lubrication points have the enough grease. The connecting bolts must be tightened and each spiral blade must be fastened.

Second, after starting the motor, gradually add the materials after the machine is in normal operation.

Third, before stop running, you must first stop feeding materials. After the materials in the box tank are discharged, you can stop the motor.

Forth, you should always check the attrition situation of the spiral wear to avoid the unnecessary loss of the spiral.

In terms of the installation and commissioning of the sand washing machine, you should pay much attention to the following aspects.

First, the equipment should be installed on the level concrete foundation and fixed by the anchor bolts.

Second, in the installation process, you should pay much attention to the verticality between the main body of the machine and the level.

Third, after the installation, you should check whether all parts of the bolts are tightened and whether the bin gate of the host is tightened.

Forth, configure the power cord and the control switch according to the power of the device.

Fifth, after the inspection, empty load test is very necessary. If the trial run is normal, the production can be carried out.

In terms of the troubleshooting of the sand washing machine, you should pay much attention to the followings.

First, the wearing parts of the bearing of the sand washing machine refer to the damage to the sealing ring. The wearing parts have not been cleaned for a long time. As a result, you should add the oil or replace the sealing ring according to the regulations. The regular cleaning is very necessary. Second, the gear of the sand washing machine is easily to be damaged. The gear is not timely maintained. As a result, you should add the oil according to the provisions. Third, the shaft of the sand washing machine and the low speed shaft of the reducer can not achieve the required degree of parallelism. You can adjust them to make them meet the requirements.